AUTONET TV

Take Charge! (Battery Testing)

OK, so you probably take your vehicle's battery for granted.  Turn the key or push a button and it starts right up.  During times of warmer weather, you probably think your battery can take it easy.  But it may surprise you to learn that hot weather can be much harder on a vehicle's battery than cold.  So it's wise to know what condition your battery is in BEFORE you find out the hard way—being stranded by a dead battery.

Your vehicle's battery won't last forever; an average battery will last 3-5 years.  When's the last time yours was replaced? You probably have no idea.  Your vehicle will usually give you some hints that it's in need of attention.  See if any of these are familiar:

• your engine doesn't turn over as quickly as it used to
• your headlights are a little dimmer
• your Check Engine or Battery dashboard light is on
• you hear a click when you try to start your vehicle
• some electrical equipment in your vehicle isn't behaving the way it used to
• your engine smells like rotten eggs
• the terminals on your battery are corroded
• your battery was made more than 4 years ago

Even if there are no signs your battery is on its last legs, it's a good idea to have it periodically checked at your vehicle service facility, at least once a year. A technician will check the date it was made (it's on the battery's case). They'll inspect your battery, cables and connections, looking for corrosion, bulges in the battery or any other abnormal signs.

Using special diagnostic equipment, the technician can run some tests on your battery and vehicle's electrical systems. They can measure how fully charged your battery is and how much potential it has to hold a charge.  Then, your service advisor will tell you how much more life to expect from your battery or recommend it be replaced. 

It you need a new one, your service advisor can recommend options for you. Important factors include brand, warranty, where the terminals are on the battery, the ability to handle different cranking loads and temperature ranges.  Bet you didn't know vehicle batteries can be that different!

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Taking the Heat (Heater Hose Maintenance/Repair)

If you have an internal combustion vehicle, you know it has a lot of hoses that carry various fluids.  And if you have a heater in your vehicle, you'll have heater hoses.

A heater hose connects to and from the engine so some coolant can be circulated through a little radiator called a heater core.  In cold weather, that heater core acts as a heat exchanger to heat up your cabin.

Even in the hot weather, the heater hoses can prove problematic.  That's because they may remain pressurized even though you're not running your heater.  Heater hoses are made out of tough materials since they must handle heat and pressure.  But even the durable rubber, plastic and metal they are made out of can crack or leak from years of use.  That means coolant can be sprayed out into the engine compartment or leak onto a driveway or garage floor. 

You may be able to see a puddle of coolant under your vehicle or perhaps smell the odor of the coolant under the hood.  Some say it has a sweet smell.  Another sign coolant may be leaking out of the heater hoses is your engine may be running hotter.   You'll be able to tell by watching the heat gauge on your dash.  Let's say your heat gauge usually points just slightly below halfway between the C and H (Cold and Hot) of the heat gauge.  But now it is just slightly above.  That's enough to tell you that the coolant temperature has gone up a little, a possible sign of trouble.

This is a good time to swing by your service facility and have them take a look. If they catch the leak when it's small, it's a relatively simple matter of draining the coolant, replacing the hoses and replacing the coolant.  Sometimes, though, a heater hose can suddenly burst and a lot of coolant can leak out quickly.  That can, in turn, cause your engine to start to overheat.  In that case, you may see your vehicle's temperature gauge shoot up pretty quickly.  Then it's best to pull over and have your car towed to a repair facility since driving with no coolant can cause severe engine damage.

Preventative maintenance is your best insurance against heater hose problems.  A technician will periodically check for any signs of cracks or leaks.  You should expect to replace a heater hose at least once during the time you own your vehicle.

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

If You Drive Like a Maniac (Aggressive Driving is Bad for a Vehicle)

When someone mentions driving like a maniac, they're not talking about you, surely? Besides the safety issues of aggressive driving, you should know that your vehicle will last a lot longer if you'll just mellow out a little.  Here are four traits good drivers follow if they want their vehicles to go the extra distance.

Cool—The driver who can't wait to get to the next stoplight is just shortening the life of his or her vehicle.  Jackrabbit starts and uneven acceleration hurts your engine because the valves and cylinder heads are stressed more.  All of those moving parts will wear out faster as well as other components that are connected.  That means things like the air conditioner, power steering pump… just about anything that attaches by a belt or a pulley.  Oh, and you'll be generating more heat.  Heat is one of a vehicle's worst enemies.

Warm—If you get in your cold vehicle which has been sitting overnight, start it up and rev the engine high, you've just put a lot of stress on your engine.  That's because you didn't let the oil (that's been sitting down in the oil pan at the bottom of the engine) get to the moving parts in order to lubricate them. Some manufacturers advise that you run your vehicle for about 30 seconds before you take off.  And if it's really cold out, you may be wise to let the engine run for a minute or two before putting a load on the engine.  Also, for the first 5-15 minutes, keep your RPMs on the low side and don't jam on the accelerator.

Smooth—You're trying to get somewhere in a hurry and have to jam on the brakes while traveling pretty fast.  Just that one time can do more damage to the brakes than you would think.  Lots of hard braking can overheat your brakes and damage your rotors, wearing them out way faster than someone who drives with a smoother touch.  Hard braking also strains suspension parts, tires and engine mounts.

Smart—You know what PRNDL stand for.  Those are the letters in your automatic transmission (Park, Reverse, Neutral, Drive, Low).  Here are another couple of letters: IQ.  A smart shifter never goes into R to D without completely stopping the vehicle, unless, of course, you're anxious to spend some big dollars on your automatic transmission. 

These days, it's common to get 200,000 miles/320,000 kilometers out of a vehicle, no problem.  It just takes regular maintenance (oil changes and regular service) and one other thing.  Showing off: showing off a little moderation in driving habits with a big payoff in the end. 

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Breathe New Life into Your Engine (MAF sensor replacement)

If you’ve noticed your vehicle is hard to start, stalling, or has lost power, the culprit may be a part with an odd name: the MAF sensor.  You may have never even heard of a MAF sensor, but it’s important that it be working correctly, or you may be experiencing some fairly significant engine issues.

All vehicles bring in air and direct it through an air filter before it goes into your engine, where it mixes with fuel to provide power to get you going. There’s a tube-like device with a sensor inside it that measures how much of that mass of air is passing through. That’s why it’s called a mass air flow sensor, or MAF sensor.  If the MAF sensor isn’t working right, the engine’s computer can’t figure out the right amount of fuel to mix with it, and your engine may hesitate or stall.  Sometimes this will cause your Check Engine Light to come on, and any time it does that, make sure you have your vehicle checked by a professional, so you’ll know what’s going on.

When you take your vehicle into your service facility, a technician will thoroughly check the system to see just where the problems are.  If your air filter is dirty, your MAF sensor may get dirty too, which might be causing the problems.  You may find your fuel economy isn’t what it used to be either.

There are other things that can cause the same symptoms, too, such as a leak in a vacuum hose. It’s also possible that the electrical connector between the MAF sensor and the engine has broken. 

The technician can use electronic diagnostic equipment to help pinpoint the exact problem or problems, replace worn parts, and test drive your vehicle to make sure it’s working correctly.

It’s also a good idea to make sure your air filter is changed regularly. A dirty air filter can contribute to a MAF sensor failure. One of the big benefits of having your vehicle regularly maintained at one facility, is they know your vehicle. So, they keep track of which of your vehicle’s parts should be periodically replaced before problems develop. 

If you keep clean air heading into your engine, it can help your engine work efficiently, and with the power it was engineered to deliver. Isn’t that a breath of fresh air?

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Singing a Different Tune (Up) (Tune Ups)

Engines required a lot more maintenance in earlier times.  You'd have to have your spark plugs, wires, rotors, caps, distributor points, fuel and air filters changed periodically.  There were mechanical adjustments of a vehicle's timing, dwell, spark gap and idle mixture, too. Unless you like to tinker with old cars, a lot of those terms won't mean much to you. 

That service was called a "tune up" back then, and you can see why.  But now, computers have reduced the number of maintenance items, and a tune up is a whole lot different than it used to be.  In fact, in some vehicle service facilities, that term is also a thing of the past. 

A tune up of today would more accurately be called simply periodic maintenance. Now, most vehicles still have spark plugs and wires, fuel filters, air filters and PCV valves, and they should be inspected tested and/or replaced at regular intervals.  Your vehicle's manufacturer has made recommendations on how often that should be. But it depends on your driving habits. Do you regularly tow a trailer? Do you drive on dusty roads often? Are you driving mostly stop and go in the city?  Depending on your answers, to those maintenance intervals might have to be more frequent.

Your service advisor will likely remind you about those "must check" items such as spark plugs and wires, air filter and oxygen sensor.  And now that the old-fashioned tune ups don't require you to take your vehicle in for maintenance as often, you can get the same benefit from scheduled oil changes or tire rotations.  When your vehicle is in for those, a technician can keep an eye on your other systems (fuel, emissions, ignition) to make sure they are operating correctly.

One thing to remember.  When you take your vehicle in for regular service or a specific issue, don't ever hesitate to ask you service advisor to explain what's being done and why.  Hey, "In Sync" may have been a boy band of an earlier era, but it's always good for you and your service advisor to be "in sync" when it comes to what maintenance is good for your vehicle.

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400